Troubleshooting Guide to Fix Linksys Velop Red Light Issue
What is that? Is the LED on your Linksys Velop extender blinking red? Well, that is a sign of danger. But, why worry when our experts are here at your service? In this blog, we have highlighted every troubleshooting hack in existence that can help you to resolve the Linksys Velop red light issue.
But, before you learn how you can troubleshoot the issue at hand, you need to fill your brain with the reasons behind it. Knowing about the reasons will assist you to get rid of the Linksys Velop red light issue in a much more efficient manner. Read on.
[Reasons] Linksys Velop Red Light Issue
Mentioned below are the topmost reasons behind the Linksys Velop red light issue:
- Your Linksys Velop device is not getting an uninterrupted power supply.
- There is too much distance between the Linksys Velop extender and host router.
- The Linksys Velop extender is running on obsolete firmware version.
- Technical glitches can also lead you to the issue at hand.
- Your Linksys Velop extender is simply damaged.
These were some of the reasons behind the red light issue. Troubleshooting it is possible if you walk through the hacks mentioned in the following section of this blog.
[Fixed] Linksys Velop Red Light Issue
1. Repair the Electrical Socket
As mentioned above, the number one reason why you are facing the Linksys Velop red light issue is because your Linksys Velop extender is not getting an adequate and uninterrupted power supply from its existing wall socket.
Therefore, it is recommended that you get your socket repaired. In case, doing so does not help you to troubleshoot the Linksys Velop red light issue, then you should probably plug your Linksys Velop extender into another wall socket.
2. Bring the Networking Devices Closer
Check the distance that is separating your networking devices. Is it too much? Nodding your head in yes? Well then, you ought to bring your devices close to each other. For that, you need to unplug the extender from its existing socket and plug it near the router.
Apart from this, ensure that there is not too less distance between the networking devices. That can stop them from communicating properly and cause much bigger issues than the Linksys Velop red light issue.
3. Perform Linksys Firmware Update
In case you are still a victim of the Linksys Velop red light issue, then you ought to perform Linksys firmware update without wasting any more time. In order to execute this process, you either need to access the Linksys extender login page or use the Linksys app.
Although performing Linksys Velop firmware update is a piece of cake, still many users have reported facing issues with it. In case, you are also facing issues during the process, consider reaching out to our technical experts. They will definitely be of some help.
4. Restart the Linksys Velop Extender
In case you are reading this hack, it means that you are still not able to troubleshoot the Linksys Velop red light issue. Well, worry not. Restarting the device has helped many users out there to resolve issues related to extender. It might help you out as well.
In order to restart your Linksys Velop, you need to first unplug it from its wall socket, wait for a couple of seconds, and then, plug it back into its wall outlet. Right after you are done restarting your Linksys Velop extender, you might have fixed the red light issue.
With the last hack, we are ending our guide based on how the Linksys Velop red light issue can be resolved. Although you will be able to resolve it in the blink of an eye, on the off chance, you are not able to, then contacting our technical experts is the right decision to take. Without taking much of your time, our experienced experts will be able to help you to troubleshoot the Linksys Velop red light issue.
Plus, you do not have to worry about the time to contact them as they have been trained to be ready to help out users like at every hour of the day, without any hesitation. Thus, contact them now via mail or live chat. The choice is yours.