Troubleshooting Linksys Velop Child Node Red Light Issue
In general terms, red is the color that signifies danger. The same is the case with your Linksys Velop child node. That means seeing a Linksys Velop child node red light is a matter of concern and it needs to be addressed to keep enjoying a seamless internet connection using the WiFi mesh system. If your Linksys node is also showing a red light then what you can do to fix it is what this guide is all about. Thus read on!
Linksys Velop Child Node Red Light: Meaning
In a Linksys WiFi mesh system, you will find two or more than two nodes. The primary node that you directly connect to the main access point becomes the Parent node. However, every other node that you use to extend the signal further in different parts of your home is known as child node. On this very child node, if you see a red light that means this node is not connected to the internet. The weak internet signal is indicated by a yellow light on the node. Though this guide is focused on fixing the Linksys Velop child node red light issue, know that the hacks mentioned ahead will suffice to fix Linksys Velop yellow light issue as well. So, let us tell you now how to fix this issue.
Linksys Velop Child Node Red Light: Solutions
Solution 1: Bring the Nodes Closer
As mentioned earlier Linksys Velop child node red light is due to no internet connection to the node. A reason for this situation can be the excessive distance between the parent node and the child node. A child node works by receiving the signal from the parent node. When the signal reception is low or zero, then the issue is indicated by the red light on the node.
To fix this, bring the child node closer to the parent node. Why? This is because only when the child node is placed within the parent node’s network range, it will be able to receive the optimum signal. Maintaining a safe distance between the devices is necessary for smooth signal transmission. However, it is to be avoided to place them very close to each other as their signals will interfere, further enhancing the problem.
Solution 2: Check Parent Node Connection
In some instances, the Linksys Velop child node red light issue can also be a consequence of poor network connection to the parent node. By saying so, we mean if the Linksys primary node or the parent node itself is not receiving a stable internet signal, then no internet connectivity to the child node is bound to happen.
Thus, check the connection between the Linksys Velop parent node and the main access point. If the cable establishing connection between the device is worn out then replace the cable. However, if it is not inserted correctly into the devices, then connect it properly. Simply put, the connection between the Linksys Velop parent node and the access point or main gateway should be secure and firm.
Solution 3: Update Firmware
Another possibility is that the Linksys WiFi mesh system is running on an obsolete firmware version.
Simply access the Linksys Velop admin dashboard and check if the latest firmware update is ready to be installed. If it is then consider updating the Linksys Velop wireless mesh system right away. This should help you fix the Linksys Velop child node red light issue.
Solution 4: Relocate Child Node
Have you placed your Linksys Velop child node in an enclosed area? Yes? This could be the reason behind the Linksys Velop red light issue.
Make sure that the node is placed in an open area from where it can easily propagate the signal. Avoid placing it in attics, basements, corners, lower shelves, behind furniture, etc. Also, take the WiFi interference into consideration while shifting the Linksys Velop child node.
Solution 5: Reboot Linksys Velop Node
Sometimes some minor technical issues can also lead to Linksys Velop red light issue.
Simply reboot your Linksys Velop child node. You need to power it off by unplugging it from the power socket. Plug the device back after a while. This reboots the node and also helps to fix minor technical glitches thereby fixing Linksys Velop child node red light.
Verdict!
That’s it! This is all about how to fix the Linksys Velop child node red light issue. We have tried to provide you with some topmost solutions that worked well with other Linksys users. We are sure these hacks will help you too. However, if the red light on the child node is adamant to change its status, then you can get in touch with our technical expert team. They will provide personal assistance to help you fix the issue at hand.